TagLine Here

DOWNLIGHT LED MR16 - 5 WATT (WARM WHITE)

$24.00

led downlights (18).JPG

MR16 LED LIGHTING DOWNLIGHT USING LATEST TECHNOLOGIES
For direct replacement of halogen lights 







FEATURES
  • This LED based MR16 is a new revolutionary design integrating a high power LED light source in a traditional MR16 halogen.
  • Our LED MR16 uses a single special SHARP led chip which gives a better even high lumen output.
  • This LED MR16 is different from  the ones you commonly see in the market which uses 3 High Power LEDs that give a spotty light and also not bright enough.
  • Our MR16 LED is shining at the reflector that can provide pleasant contemporary light in the blink of an eye.
  • Our MR16 LED housing is with ceramic paint as opposed to the typically used aluminum housing. 
  • This improves heat dissipation and which means the bulb is still cool to touch after the light has been in use.
Advantages of Our LED Downlight
  • High Lumen 
  • High CRI 
  • High Heat Sink Material 
  • Low Hear 
  • No UV/IR
TECHNICAL INFORMATION 
Power 
5W   (Direct Replacement For Halogen Mr-16)
Led Source
Sharp   Led Chip
Light Output
260-310 Lumens
Colour Temperature
3000k
Colour Rendering Index
>85%
Beam Angle
30-35   Degree
Voltage
12   Volt
Dimensions
53mm   x 50 Mm (Diameter)


















KITCHEN.jpgLIVING ROOM.jpg

BENEFITS OF LED LIGHTING 
  • Cost
  • Save Electricity Bill
  • Direct Replacement
LED Definations:
MR16:
Is a 12V input. MR16 has needs to be connected to the transformer before being connected to the circuit.
Beam Angle:

Is the degree of width that light is diffused from the light bulb.

So depending if you want a narrow spot light or a wide flood light, the beam angle will be different.
A beam angle of >30 degrees is considered to be a larger beam angle.

Colour Rendering Index (CRI):
Is a measure of how accurately the light source mimics the colour of objects in natural daylight.
A CRI of 100 (the value of the sun) is the most accurate colour rendering.

Colour Temperature:
Measured in degree Kelvin (K), the colour temperature indicates the colour of the light source.
The higher the Kelvin, the ‘cooler’ the light colour; thus the lower the Kelvin, the ‘warmer’ the colour.
As a reference, candlelight is ~1500K.     

Lumens (lm):

Indicates the amount of light that the light source produces. The higher the lumen, the greater the light output.
A typical 30W incandescent light produces ~355lm; an 5W LED light produces 260lm-310lm.

Watts
(W):

Indicates the power consumption of the bulb to make the light.
 

Add to Cart:

  • Model: LMS-1005-MR16
Ask a question



Qty Discounts New Price
1-9
$24.00
10-49
$23.00
50+
$22.00

WARNING: An Error occurred, please refresh the page and try again.